Journal of Material Science and Technology Research

Articles

Vol. 5 (2018)

Effects of Hot Strip Microstructure on the Deformation Microstructure and Textures after Cold Rolling in Ferritic Nonoriented Electrical Steels

DOI:
https://doi.org/10.31875/2410-4701.2018.05.5
Submitted
February 18, 2018
Published
2018-02-18

Abstract

The magnetic properties of electrical steels are related to the microstructure and texture of the final processed steel. There is an interplay and interaction of the microstructure and texture between the various processing steps. The ongoing structural changes at final annealing of the cold rolled material depend sensitively on the deformation structure after the cold rolling with high deformation. In this paper, we will study in detail the role of the microstructure of the hot strip on the deformation structure after cold rolling with high deformation.

References

  1. E. Gomes, J. Schneider, K. Verbeken, H. Hermann, Y. Houbaert, Effect of Hot and Cold Rolling on Grain Size and Texture in Fe-Si Strips with Si-Content Larger than 2 wt%, Mater. Sci. Forum 638-642 (2010), p. 3561. https://doi.org/10.4028/www.scientific.net/MSF.638-642.3561
  2. K. Verbeken, J. Schneider, J. Verstraete, H. Hermann, Y. Houbaert, Effect of Hot and Cold Rolling on Grain Size and Texture in Fe-2.4wt%Si Strips, IEEE Trans. on Magn. 44 (2008), p.3820. https://doi.org/10.1109/TMAG.2008.2001318
  3. JT. Park, JA. Szpunar. SY. Cha, Effect of Heating Rate on the Development of Annealing Texture in Nonoriented Electrical Steels, ISIJ Inter. 43 (2003), p.1611. https://doi.org/10.2355/isijinternational.43.1611
  4. JT. Park, JA. Szpunar, Evolution of recrystallization texture in nonoriented electrical steels, Acta Materialia 51 (2003), p.3037. https://doi.org/10.1016/S1359-6454(03)00115-0
  5. JT. Park, JA. Szpunar, Effect of initial grain size on texture evolution and magnetic properties in nonoriented electical steels, J. Magn. Mater. 321(2009) 1928. https://doi.org/10.1016/j.jmmm.2008.12.015
  6. Jurij J. Sidor, K. Verbeken, E. Gomes, J. Schneider, PR. Calvillo, Leo A.I. Kestens. Through Process Texture Evolution and Magnetic Properties of High Si Non-Oriented Electrical Steels, Mater Charact. 71 (2012), p. 49 https://doi.org/10.1016/j.matchar.2012.06.006
  7. O. Fischer, J. Schneider, Influence of Deformation Process on the Improvement of Nonoriented Electrical Steel, J. Magn. Mater. 254-255 (2003), p. 302. https://doi.org/10.1016/S0304-8853(02)00965-4
  8. J. Schneider, K. Verbeken, Y. Houbaert, Texture Evolution During Thermo-Mechanical Processing of High Si electrical Steels – A Comment, Proc. 4. International Conference Magnetism and Metallurgy WMM12, Gent, 20-22 June 2012, p. 367
  9. KM. Lee et al., Effect of texture and grain size on magnetic flux density and core loss in non-oriented electrical steel containing 3.15% Si, J. Magn. Mater. 354 (2014) 324 https://doi.org/10.1016/j.jmmm.2013.11.030
  10. S. Paolinelli, Non-oriented Silicon Steels with Improved Texture, Proc. 5. Int. Conf. Magnetism and Metallurgy WMM12, Gent, (2012) 120
  11. J. Schneider, A. Stöcker, A. Franke, C. Schröder. G. Li and H. Hermann, Evolution of Microstructure and Texture Along the Processing Route of Ferritic Nonoriented FeSi Steels, Proc. 6th Int. Conference on Magnetism and Metallurgy WMM14 Cardiff (2014), 208
  12. Hai-Tao LIU, J. Schneider, A. Stöcker, A. Franke, F. Gao, HY. Song, ZY. Liu, R. Kawalla and G.-D. Wang, Microstructure and Texture Evolution in Non-oriented Electrical Steels along Novel Strip Casting Route and Conventional Route, steel research int. 87 (2015) 589-598. https://doi.org/10.1002/srin.201500351
  13. J. Schneider, A. Franke, A. Stöcker, HT. Liu, GD. Wang, R. Kawalla, Evolution and Interaction of the Microstructure and Texture at the Different Processing Steps for Ferritic Nonoriented Electrical Steels, IEEE Trans. on Magn. 52 (2016) 1-6. https://doi.org/10.1109/TMAG.2016.2530147
  14. W. Saikaly et al., Effect of cold rolling reduction and prior grain size on the final microstructure and magnetic properties of thin gauge low loss fully processed electrical steels, Proc. Conference SMM Sao Paulo 2015.
  15. J. Schneider, A. Stöcker, A. Franke, and R. Kawalla, Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel, AIP Advances 8, 047606 (2018). https://doi.org/10.1063/1.4993526
  16. G. Gottstein, Physikalische Grundlagen der Materialkunde, Springer Berlin Heidelberg 2007
  17. D. Raabe, Physical Metallurgy, 5th Edition, Elsevier (2014), p. 2291. https://doi.org/10.1016/B978-0-444-53770-6.00023-X
  18. PR. Calvillo, J. Schneider and Y. Houbaert, Characterization of Flat Rolled High-Silicon Steel by EBSD, Defect and Diffusion Forum Online:2009-03-02 ISSN: 1662-9507, Vols. 283-286, 413. https://doi.org/10.4028/www.scientific.net/DDF.283-286.413
  19. B. Hutchinson, Deformation Substructures and Recrystallization, Mat. Science. Forum, 668 (2007), 13. https://doi.org/10.4028/0-87849-443-x.13
  20. Jae-Young Choi, Jong-Tae Park, Byung-Keun Bae and Jae-Kwan Kim, The Effects of Hot Band Annealing Temperature on the Texture of 1% and 2%Si Nonoriented Electrical Steels, Material Science Forum Vols. 558-559 (2007), 701. https://doi.org/10.4028/www.scientific.net/MSF.558-559.701
  21. S. Fortunati, S. Cicalè, Jürgen Schneider, Armin Franke, Rudolf Kawalla, Developments in the Field of Electrical Steels over the Last Years, Proc. 7th International Conf. Magnetism and Metallurgy WMM18, June Rome, Italy (2016), p.29, ISBN 9788890003301
  22. D. Raabe, Overview on Basic Types of Hot Rolling Textures of Steels, steel research 74, No. 5 (2003), 327. https://doi.org/10.1002/srin.200300194
  23. B. Bacroix, J. Schneider, A. Franke, to be published R. K. Ray, JJ. Jonas and RE. Hook, Cold Rolling and annealing textures in low carbon and extra low carbon steels, International Materials Review Vol. 39, No. 4 (1994), 129. https://doi.org/10.1179/imr.1994.39.4.129
  24. RK. Ray, JJ. Jonas and RE. Hook, Cold Rolling and annealing textures in low carbon and extra low carbon steels, International Materials Review Vol. 39, No. 4 (1994), 129
  25. J. Schneider, A. Franke, A. Stöcker and R. Kawalla, Deformation Structure and Recrystallization of Ferritic FeSi Steels, steel research int. 87, no. 8 (2016), p.1054. https://doi.org/10.1002/srin.201500447

Similar Articles

1-10 of 43

You may also start an advanced similarity search for this article.